Linear Voice Coil Motor without Internal Bearing, Hollow Core

Search

only one keyword search term per box

Categories

Home

        Linear DC Motor, Hollow Core
        HVCM-025-038-003-02

Linear Voice Coil Motor without Internal Bearing, Hollow Core
item #: HVCM-025-038-003-02

Unit Price:
1 piece:	$582.62
2-4 pieces:	$553.47
5-9 pieces:	$504.31
10-24 pieces:	$446.71
Prices for larger quantities are significantly less and may be obtained by contacting us or by clicking Request for Quote

All Values at 25慢
Intermittent Force at 10% Duty Cycle = 3.2 LB (14.4 N)
Continuous Force = 1.0 LB (4.6 N)
Force Constant = 0.88 LB/A (3.9 N/A)
Back EMF Constant = 0.10 V/IN/S (3.9 V/M/S)
Stroke = 1.00 IN (25.4 mm)
Coil Clearance Per Side = 0.015 IN (0.38 mm)
Coil Assembly Mass = 1.22 Oz (35 GR)
Body Mass = 3.46 Oz (98 GR)
Coil Resistance = 7.4 Ohms
Coil Inductance at 1000 Hz = 2.4 mH
Maximum Continuous Power = 10.0 W
Mounting hardware in various lengths and styles is available and may be obtained at

This motor, having an axial hole throughout the entire coil and body structure is ideal for optical focusing, scanning and other precision positioning applications requiring an axial opening through the motor.

Linear DC Motors, Voice Coil Motors (VCM) or Voice Coil Actuators (VCA) are the simplest type of electric motors. These motors consist of two separate parts; the magnetic housing and the coil. Applying a voltage across the terminals of the motor causes the motor to move to one direction. Reversing the polarity of the applied voltage will move the motor to the opposite direction. The generated force is proportional to the current that flows through the motor coil. This force is almost constant in the specified stroke range of the motor.

Voice coil motors do not need commutation and using a position sensor, positioning accuracies of less than one micron or 0.00004 inches are achievable.

The non-commuted motor construction increases reliability. The direct coupling of the motor to the load allows for fast acceleration / deceleration and high speed operation.

These motors are supplied with internal linear bearings and shaft.

This motor may be used in conjunction with a position sensor and a motion controller for accurate positioning.
For proper heat sinking the motor may need to be installed on a metallic body.

Quantity adjustment on next page