DC Servo Motor Driver

710-01

     

 

 

Enlarge

Drawing in quick view

The 700 series is a high performance, cost effective Servo Motor Driver to implement intelligent Motion Control. The driver incorporates an advanced architecture and surface mount technology to achieve an exceptional power density.

 

Datasheet in PDF
Features:
  • Run DC Servos With Step And Direction Control Inputs
  • 20 Amp Motor Output
  • +18 VDC to +80 VDC Power Supply
  • PID Closed Loop Operation
  • Quadrature Encoder Feedback
  • Programmable, Teachable or Manual Control
  • Quadrature Encoder Feedback
  • Anti-Dithering Circuit Keeps Motor Silent
  • +5VDC, 50 ma Encoder Supply
  • Pulse By Pulse Motor Current Limiting
  • 0 to 20 Amp Current Limit Adjust Range
  • 25 KHz PWM Frequency

Features:
  • No Tachometer Feedback Needed
  • 0 to 300 KHz Step Rate
  • Latched Fault Protection
  • 0 C to 70 C Operating Temperature
  • LED Fault Indicator
  • Small Size: 2.5" X 2.5" X 0.82" (63 mm X 63 mm X 21 mm)
  • Light: 3.6 Oz (100 gm)
  • Anodized Aluminum Package
  • Modular 2-Piece Main Connector

 

       
ELECTRICAL SPECIFICATIONS
Supply Voltage

+18 VDC to +80 VDC

Phase Current

0 to 20 Amps 

Step Frequency

0 to 300 kHz

Minimum Load Inductance 1 mH
MECHANICAL SPECIFICATIONS
Weight 3.6 oz. (100 gm)
Dimensions 2.5”W, 2.5”D, .85”H (63.5 mm, 63.5 mm, 21.5 mm)
Mounting Pattern Four 6-32 screws, 1.75” by 2.375” (44.5 mm, 60 mm)

                   Copyright © Moticont    Website by Weblynx