Motion Control Products
1100 Series

This motion control system is stand-alone or externally controlled, easy-to-use, plug-and-play and cost effective solution for motion control applications.

Each system includes the power supplies, controller and the servo motor drivers.

This motion control system supports up to 4 axes of motion, 16 TTL / CMOS inputs, 16 TTL / CMOS outputs, 3 analog inputs, and 4 optical encoder inputs. The command port is provided for stand-alone operation

The system may be controlled in different ways;

1) Stand-alone
In this mode, the controller does not need an external device such as a PC to operate. The controller is programmed in a simple programming language. The code is developed, downloaded to the controller, run and saved in the controller's non-volatile memory using the supplied Integrated Development Environment (IDE) software.

2) Externally Controlled
In this mode, the external host such as a PC, micro-controller or PLC sends a series of commands to the controller via the serial port. The controller processes and performs the incoming commands and responds with proper messages.

3) Control Panel
The supplied user friendly Control Panel software allows the user to set-up the module quickly. The operator is able to move the mechanism to different positions by pressing the corresponding buttons of the Control Panel.

Click for Programming Examples

Motion Control 100 series

  • Plug-and-Play
  • Quick and Easy to Install
  • Very Compact and Easy to Use
  • Low Power Consumption, High Speed Capability

Different Modes of Operation: 
  • Host Controlled, PLC, C/C++, Visual Basic, LabVIEW™, Matlab™
  • Totally Integrated Solution
Enlarge Datasheet in PDF

                   Copyright © Moticont    Website by Weblynx